Learn how to choose between indoor and outdoor locations, prepare your flooring, understand electrical safety standards and avoid common installation mistakes.
Choosing Between Indoor and Outdoor Placement
Installing your infrared sauna indoors is the recommended option because all our saunas are engineered and designed for dry, indoor environments. Placing your sauna inside a climate-controlled room protects the premium timber from fluctuating humidity, temperature extremes and moisture. Excellent indoor choices include a home gym, a spare bedroom, a master bathroom suite, or a clean, dry garage.
While the appeal of outdoor placement is understandable, our saunas are not designed to stand unprotected in open weather. Exposure to direct rain, morning dew, high humidity and direct sunlight will warp the solid timber, damage the intelligent heaters and compromise the electrical controllers. If you choose to install your sauna outdoors, you must satisfy the following protective conditions:
- Fully covered waterproof roof: The sauna must be situated under a solid, waterproof roof, such as a covered veranda, porch, patio or pergola. It must be protected from overhead rain and any wind-blown moisture.
- Certified outdoor cover: A custom outdoor cover must be fitted over the cabin at all times when the sauna is not in use. This heavy-duty, weather-resistant cover provides a secondary barrier against moisture and environmental dust.
- Stable ambient temperatures: Avoid areas exposed to extreme cold or heat, which can force the heaters to work longer to reach your desired temperature, increasing energy consumption.
Using an outdoor cover under a fully covered, waterproof roof is a requirement to keep your structural and electrical warranty active. If you install your cabin in an outdoor space without these required protections, any water damage or weathering will void your warranty.
Measuring Your Space and Clearance Requirements
Accurately measuring your intended location to prevent delivery day complications and ensure your sauna has the room required for peak performance. You must consider both the physical footprint of the cabin and the clearance around it.
To ensure proper air circulation and ventilation, you must allow a minimum of 5 to 10 centimetres of clearance on the left, right and rear sides of the sauna. Additionally, leave at least 30 centimetres of vertical clearance between the top of the sauna roof and your ceiling. This ventilation clearance is important for several reasons:
- Heat dissipation: While infrared saunas heat your body directly rather than warming the surrounding air (Hussain & Cohen, 2018), the power supply and intelligent controllers still generate mild heat that must dissipate naturally.
- Moisture control: Adequate airflow prevents stagnant, humid air from building up around the wooden panels and electrical components, protecting the structure from dampness.
- Assembly and maintenance access: Having a buffer space around the cabin allows the installation team to lock the panels together securely and provides technicians with access if servicing is required.
Beyond the final installation site, you must also plan the delivery path. Our saunas are delivered as flat, pre-fabricated panels that must be carried from the delivery vehicle to your chosen room. Carefully measure the height and width of every entrance, hallway, door frame, stairwell and tight corner along the path to ensure the panels can pass through safely without obstruction.
Preparing the Surface and Floor Support
A fully assembled infrared sauna carrying multiple occupants represents a substantial concentrated load, meaning the cabin must sit on a completely flat, level and structurally stable floor.
Good flooring options for your sauna include ceramic tiles, sealed concrete, hardwood timber, high-quality laminate or heavy-duty vinyl. These surfaces are level, stable and easy to clean. You must avoid placing your sauna on thick, uneven or plush carpet. Under heavy weight, plush carpet will sink unevenly, which misaligns the magnetic seals or interlocking brackets on the wooden panels. This misalignment creates gaps that allow heat to escape, reducing the efficiency of your sessions and forcing the heaters to draw more electricity to maintain temperature.
If you choose to install your sauna on an outdoor covered deck, you must take extra precautions:
- Under-deck drainage: Verify that the deck has proper drainage and that water does not pool beneath the decking boards. Rising damp or stagnant water under the deck can create a high-humidity microclimate that rots the sauna floor from below.
- Level surface: Decks are often constructed with a slight slope to assist with rainwater runoff. If your deck is sloped, you must use a level foundation or shim the base of the sauna safely to ensure the cabin stands perfectly vertical.
- Moisture barriers: Consider placing a breathable, waterproof barrier beneath the sauna base to block rising ground moisture while allowing air to circulate.
Electrical Compliance and Safety Standards
Operating your home infrared sauna safely requires strict adherence to electrical standards and manufacturer specifications. Our saunas use advanced heating systems that require a direct, stable connection to a grounded wall outlet.
Your sauna must be positioned within 2 metres of an appropriate wall socket, which matches the length of the supplied power cord exiting from the rear left of the base. You must never use extension cords, double adaptors or power boards. Because saunas draw continuous electrical current over extended periods, temporary adaptors and extension cords can overheat, melt or fail, representing a severe electrical fire hazard.
Each of our models is engineered with specific electrical demands, ranging from simple plug-and-play connections to dedicated, high-amperage lines:
- Solo System: This portable dome system draws 4.0 amps and plugs directly into a standard 10-amp household outlet.
- Signature 1 and mPulse Aspire: These single-person cabins draw up to 10.0 amps. While they use a standard plug, they must connect to a dedicated 10-amp circuit.
- Amplify IV: This multi-person model draws more power and requires a dedicated 15-amp circuit and a dedicated 15-amp socket.
- mPulse Believe and Conquer: These intelligent wellness models draw up to 15.0 amps and require a dedicated 15-amp circuit. The mPulse Conquer also requires a 20-amp circuit breaker at the switchboard.
- mPulse Discover and Empower: These large, premium saunas draw 20.0 amps and require a hardwired connection directly to a 25-amp supply with a 25-amp circuit breaker.
In Australia, a standard 10-amp power point is physically different from a 15-amp power point, with the 15-amp socket featuring a wider earth pin for safety. You must never file down a 15-amp pin or use an adaptor to force it into a standard 10-amp wall socket. This illegal modification bypasses critical safety designs, poses an immediate fire risk and voids your product warranty.
All electrical installation work (including running new dedicated circuits, installing 15-amp sockets or performing hardwired connections) must be completed by a licensed electrician. In Australia, this work must comply with Australian Standard AS/NZS 3000, which defines the safety and installation guidelines for all residential electrical wiring. During the pre-installation check, your electrician must also verify that your home switchboard includes modern safety switches, known as Residual Current Devices, to protect your household from electrical faults.
Common Installation Mistakes to Avoid
Knowing common mistakes before your sauna arrives ensures a smooth delivery and protects your investment from long-term damage:
- Using unlevel flooring: Installing the sauna on an uneven surface causes the pre-fabricated timber panels to twist slightly, preventing the glass door from sealing tightly and leading to heat loss.
- Ignoring the delivery path dimensions: Failing to measure doorways, hallways and tight corners can result in panels being unable to reach the intended room, causing costly delivery delays.
- Restricting ventilation clearance: Pushing the sauna flush against walls or blocking the roof space restricts airflow, causing the power supply and electronics to run hot and shortening their operational lifespan.
- Using extension cords or power boards: Connecting your sauna to a shared power board or extension lead can overload the connection, melting the plastic and creating a fire hazard.
- DIY electrical installations: Attempting to wire a 15-amp outlet or hardwire a sauna yourself is illegal in Australia, extremely dangerous, voids your warranty and invalidates your home insurance.
- Poor outdoor water protection: Placing the sauna in an outdoor area where wind-blown rain can reach the timber, or neglecting to use the outdoor cover, leads to rapid timber deterioration and electrical failure.
Maintenance and Safety for Long-Term Ownership
Maintaining your infrared sauna is simple, but consistent care is essential to preserve the non-toxic, chemical-free timber and protect the electrical components from moisture.
Because our saunas are dry saunas, you must never throw water or pour liquid over the infrared heaters, which differs from traditional steam saunas. Keep all liquids, water bottles and wet towels away from the heater panels, digital controllers and power connections to prevent short circuits.
To keep the interior hygienic and protect the natural wood:
- Use clean towels: Lay a clean, dry towel on the bench seat and another on the floor during every session. These towels absorb your sweat, preventing body oils, salts and moisture from soaking into the raw, handcrafted timber.
- Ventilate after use: When your session ends, leave the glass door ajar for 15 to 20 minutes to allow any residual humidity to vent naturally.
- Wipe down surfaces: Wipe the timber bench and floor with a clean, slightly damp cloth after use to remove any surface dust. Never use harsh chemical cleaners, bleach or abrasive scrubbers, as these can damage the non-toxic wood and release harmful vapors during your next heated session.
- Inspect the outdoor cover: If your sauna is situated outdoors, regularly check the outdoor cover for any signs of wear, tears or pooling water on the top, ensuring it continues to provide absolute protection.
Planning Your Next Steps
Taking the time to plan your installation space ensures that your transition to home infrared therapy is a smooth and rewarding experience. Sharing these technical requirements with your builder, architect or electrician early in the process will prevent unexpected delays on delivery day.
Before making your final selection, we suggest exploring the full range of sauna options to compare physical dimensions and capacities. For detailed structural drawings and electrical wiring schematics, you can download our comprehensive product specification sheets or view the official installation manuals to share with your tradespeople.
If you have specific questions about site preparation, read frequently asked questions, or read our official warranty terms to understand the required environmental protections.
To purchase a weather-resistant outdoor cover or other premium cabin accessories, browse our shop, or submit a support request to consult with our technical support team.

