Chromotherapy Support

First, ensure the Chromotherapy wire, located at the base of the light strip of the upper dome, is connected to the control box. To control the lights, point the remote at the control box, not the colored lights. The remote must be within a 914mm radius of the control box.

NOTE: Make sure when using the Solo® domes that the Chromotherapy wires are not being pinched by the domes. This can cause the light strip to fail.

1. Chromotherapy Remote Control - Utilize the small remote that comes with your sauna to manage the internal lights, enabling color changes and on/off controls with ease.
2. Internal Lights Toggle - For newer mPulse models, you may need to activate the internal lights toggle. To do this, access your in-sauna tablet through the Sunlighten app. Navigate to 'My Sauna' and locate the light bulb icon. Toggle on the lights from here. Then, use the Chromotherapy remote to select your desired color by pointing it at the light bulbs.
3. Battery - If the remote isn't working it could need a battery replacement (CR2032, a small flat disk).
4. Remote Range - The remote has a short range and may need to be used closer to the light, a foot or less from it.
5. Full Contact - It's possible the light itself may not be rotated in the roof socket so that the metal leads aren't making contact. Make sure the lights are adequately tightened.
6. Voltage - If the remote has never worked it may be an indication that you received the one for the alternate voltage bulb (there are 12v and 5v depending upon sauna model)

Sauna accessories have separate user manuals. Refer to the appropriate manual:

• Chromotherapy – Manual
• Acoustic Resonance Therapy – Manual